Kumho EPS, is approved by UL,
FDA and adheres to domestic food
sanitation regulations, guaranteeing
quality and stable performance.
From 0.3mm~0.5mm cup formative micro
particles to over 2.0mm molded product
formative macro particles, we produce
a variety of product grades appropriate
for heat-resistance, shock absorption,
construction materials and packaging.
We are developing and producing
energy efficient products, also.
General
Purpose
EPS GN12
EPS GN16
EPS GN20
EPS GN30
1.1
- 1.5
0.9 - 1.1
0.6 - 0.9
0.5 - 0.6
Ice box, Big buoys
Fish and fruit containers, Ice box, Small buoys
Home electric packaging materials, Fish box
Thin-walled molded products
*
Good shock absorbency
*
Easy to form and process.
*
Highly water-resistant with a
low water absorbency rate.
*
Low heat conductivity, good heat
insulation and chemical-resistance.
*
Good electrical insulation.
*
Store in a space indoors with an
air ventilation duct in the lower
part of the room. EPS's foaming
agent stays on the floor or in the
water pit because it is heavier
than air. Therefore an air ventilation
duct must be installed to maintain
a gas density of 1.5% or lower.
* It
produces static because it has a
foaming agent in it, unlike other
resins. When storing or transporting,
static removing equipment should
be utilized to prevent fire caused
by static discharge.
* Gas
continues to be generated even in
storage. Electrical systems in the
storage room should be anti-explosive,
and no fire should come near the
storage area.
* When
processing, suffocation from the
gas and accidents caused by sparks
could occur. Sufficient ventilation
and a temperature ignition gauge
is needed.
* Do
not store outdoors or in high temperature
areas. (Maintain storage temperature
at under 15℃
* When
using a hopper loader, use all the
material if possible. Remove left
over material from the hopper. Also,
fill the hopper with air before
using to load EPS.
* EPS
produces toxic fumes when burning.
Wear protective gear, such as a
gas mask.
